|
|||||||||||||||
|
PLINE
(command)
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
PLINE
(command)
|
|||||||||||||||
|
|||||||||||||||
Create polyline
Draw
toolbar: 
Menu
: Draw
Polyline
Command
line: PLINE
Specify starting point: Specify a point (1)
Specify the next point or [Arc / Close / close Hv / Close Vh / Length / Undo ]: specify a point (2) or enter an option or else press ENTER to finish
Next pointIt draws a line segment. The previous prompt is repeated. |
ArcIt adds arc segments to the polyline. Specify endpoint of arc or [Angle/CEnter/CLose/Direction/Line/Radius/Second pt/Undo]: specify a point (2) or enter an option
Endpoint of arcIt draws an arc segment. The arc segment starts at the last point tangent to the previous segment of the polyline. The previous prompt is repeated AngleIt specifies the included angle of the arc segment from the start point. Specify included angle:
Entering a positive number creates counterclockwise arc segments. Entering a negative number creates clockwise arc segments. Specify endpoint of arc or [CEnter/Radius]: specify a point or enter an option Endpoint of arc It specifies the endpoint and draws the arc segment. Center It specifies the center of the arc segment. Specify center point of arc center point of arc : Radius It specifies the radius of the arc segment. Specify radius of arc: specify a distance Specify Specify direction of chord for arc < current>Specify a point or press ENTER CenterIt specifies the center of the arc segment. specify center point of arc: specify a point (2) or enter an option Specify endpoint of arc or [Angle/Length]: specify a point (3) or enter an option
Endpoint of arc Specifies the endpoint and draws the arc segment. Angle Specifies the included angle of the arc segment from the starting point. Specify included angle: Length It specifies the chord length of the arc segment. If the previous segment is an arc, the new arc segment is drawn tangent to the previous arc segment. Specify the direction of the chord : CloseIt closes a polyline with an arc segment.
DirectionIt specifies a starting direction for the arc segment. Specify the tangent direction from the start point of arc: Specify a value or a point (2) Specify endpoint of arc: specify a point (3)
LineExits the Arc option and returns to the initial PLINEcommand prompts. RadiusIt specifies the radius of the arc segment. Specify radius of arc: specify a distance Specify the endpoint of arc or [Angle]: Specify a point or enter A
Endpoint of arc It specifies the endpoint and draws the arc segment. Angle It specifies the included angle for the arc segment. Specify included angle: Specify direction of chord for arc < current>: Specify an angle or press ENTER Second ptSpecifies the second point and endpoint of a three-point arc. Specify second point on arc: Specify a point (2) Specify end point of arc: Specify a point (3)
UndoIt removes the last arc segment added to the polyline. |
CloseIt draws a line segment from the current position to the starting point of the polyline, creating a closed polyline.
|
CloseIt draws a line segment to the first point of the polyline, to close it.
|
Close HVIt draws 2 line segments to close it, the first Horizontal, the second Vertical . |
Close VHIt draws 2 line segments to close it, the first Vertical, the second Horizontal. |
LengthIt draws a line segment of a specified length at the same angle as the previous segment. If the previous segment is an arc, the new line segment is drawn tangent to that arc segment. Specify length of line: Specify a distance
|
UndoIt removes the last line segment added to the polyline. |
