|
|||||||||||||||
|
RECTANG
(command)
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
RECTANG
(command)
|
|||||||||||||||
|
|||||||||||||||
It draws a rectangular polyline
Draw
toolbar: 
Menu
: Draw
Rectangle
Command
line: RECTANG
Specify first corner point or [Chamfer/Fillet/Normal ]: Specify a point or enter an option
Specify
the point on the first corner or[Chamfer/Fillet/Normal]
First cornerSpecifies a corner of the rectangle. Specify the point on the opposite corner or[Dimension]: Specify a point or enter an option Other opposite corner
It creates a rectangle using the specified points as diagonally opposite corners. Dimension It creates a rectangle using length and width values. Specify the width of rectangle <0.0000> Enter a non-zero value Specify the height of the rectangle <0.0000> Enter a non-zero value |
ChamferIt sets the chamfer distances for the rectangle. Specify first chamfer distance < current>: Specify a distance or press ENTER Specify the second chamfer distance < current>: Specify a distance or press ENTER The specified values become the current chamfer distances for subsequent RECTANG commands. |
FilletIt specifies the fillet radius of the rectangle. Specify the fillet radius <current>: Specify a distance or press ENTER The specified value becomes the current fillet radius for subsequent RECTANGcommands. |
NormalIt restores the normal corners of a rectangle, without any chamfer or fillet. |
