|
|||||||||||||||
|
SNAP
(command)
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
SNAP
(command)
|
|||||||||||||||
|
|||||||||||||||
It constrains the movement of the cursor to specified intervals
Status
bar: 
Snap
toolbar: 
Menu
: Tools
Snaps Grid
Snap
Command
line: SNAP
Specify snap spacing or [ON/OFF/Aspect/Rotate/Origin] <current>: Specify a distance, enter an option, or press ENTER
Using the Status bar or Menu command the SNAP status is automatically inverted.
|
Snap
spacing
|
Snap spacingIt activates the Snap mode with the specified value. |
OnIt activates the Snap mode using the current resolution, rotation and style of the snap grid.
|
OffIt turns the Snap mode off but it retains the current settings. |
AspectSpecifies different spacing in the X e Y directionsThis option is not available if the current snap style is Assonometric. Specify x spacing < current>:Specify a distance or press ENTER Specify y spacing < current>: Specify a distance or press ENTER
|
RotateIt sets the origin and the rotation of the snap grid. The rotation angle is measured according to the current UCS. It is possible to specify a rotation angle between -90 and + 90 degrees. A positive angle rotates the grid counterclockwise about its base point. A negative angle rotates the grid clockwise. Specify rotation angle < current>:Specify an angle or press ENTER
|
OriginIt specifies the point of origin of the grid. Enter the coordinates for the new origin Set the new x and y coordinates for the grid. |
