|
|
| Drawing
geometric objects |  | |
|
|
Drawing
polylines
|
|
|
How
to draw a line and arc combination polyline
- Click
on the menu Draw
Polyline. - Specify
the first point of the polyline.
- Also
specify the endpoint of the first polyline segment.
- Switch
to arc mode entering A
(Arc)
on the command line.
- Enter C (Angle),
specify a value (in degrees) for the arc's angle and then specify the arc's endpoint.
- Enter CE (Center)
and specify the arc's center using the pointing device.
- Enter CL (Close)
to close the polyline.
- Enter D (Direction)
and enter a value (in degrees) to display the direction of the tangent to the arc.
- Enter R (Radius)
and enter a value for the length of the radius.
- Enter S (Second
point) and specify the opposite extreme, to reach with an arc.
- Go
back to the line mode entering L (Line).
- Enter U (Undo)
to delete the last segment.
- Specify
further polyline segments.
- Press ENTER to
end or enter C to
close the polyline.
Draw
toolbar 
Command
line: PLINE
